Skip to main content

【Smart Construction Dashboard】 How to use Terrain Guides?

Hiro H

 

Issue

How to use Terrain Guides?

 

Answer

Please refer to the explanations below.

 

Explanation

To help with the collection of annotations, Terrain Guides provide quick access and display to Slope and Elevation measurements along with Contours.  

Important
The terrain guides are available within the Measurement and Annotation panel.  
mceclip0.png

Within the Terrain Guide menu, there are the following options:

1.  Toggle the visibility of the terrain guide on / off. 

2.  Configure a terrain guide type. 

3.  Select the surface to be used for the terrain guide.  The default is the Current time.  You can select any Design surface, Survey or As Built layer.

mceclip1.png

Slope

Displays the slope values of the selected surface.  You can change the Minimum and Maximum elevation values along with selecting a color ramp.  

mceclip2.png

Elevation

Displays the elevation values of the selected surface.  You can change the Minimum and Maximum elevation values along with selecting a color ramp.  

mceclip3.png

Contours

Displays the contours of the selected surface.  You can change the Minimum and Maximum elevation values along with selecting a color ramp.  

mceclip4.png

Tip
Turn on Terrain guides to easily define stockpiles or other terrain features while creating measurements and annotations.
mceclip5.png
 

We hope this article was useful to you, if not please contact your local support for further guidance.

Related articles

Comments

0 comments

Please sign in to leave a comment.